Posted in

What is the function of stator in an electric motor?

When I first started out in the stator and rotor supply business—three years ago, back when I was shipping small batches of stamped steel laminates out of a cramped garage in Detroit—I’d get a lot of questions from new motor manufacturers. It wasn’t “what’s the best material for laminations?” or “how do you adjust lamination stack height for torque?” No, it was simpler, often mumbled over a coffee at a trade show or a quick call to the office: “What even is a stator? I know it’s part of the motor, but that’s about it.” Stator and Rotor

At the time, I’d explain it the best I could, but I noticed most explanations online are either too technical for a beginner or so simplified they skip the actual work the stator does. Since we work with stators every single day—our team measures air gaps to within a thousandth of an inch, test for winding resistance under extreme humidity, and sort laminates by grain orientation to cut core losses—we live the function of a stator, not just read about it. That’s why I wanted to break this down, not just for engineers, but for anyone wondering why this unassuming part is the backbone of every electric motor, from the ones powering a washing machine to the electric freight trucks rolling off assembly lines today.

Let’s start with the basics: every rotating electric motor is built around two key parts, right? The stator and the rotor. The rotor is the spinning part—if you’ve ever taken a motor apart, that’s the cylinder in the middle that turns the shaft. The stator is the stationary part that wraps around the rotor, sitting inside the motor’s housing, with a small, precise gap between its inner edge and the rotor’s outer edge. It sounds straightforward, but that stationary setup is critical. If the stator spun, we wouldn’t have a consistent magnetic field to interact with the rotor—simple as that.

Now, the first core function of a stator is to generate a rotating magnetic field. That’s the magic trick that makes electric motors work, and every part of the stator is designed to pull that off. Let’s walk through how that works, because when you see the process, it makes sense why every detail matters. Stators are built from stacked thin steel laminates—we use silicon steel, specifically, because it reduces energy lost as heat, something every manufacturer chases these days, when efficiency is everything. Those laminates have slots cut into them, all along their inner circumference. Those slots are where we install insulated copper windings—thousands of feet of copper wire, wound in specific patterns, depending on the motor’s size and use. When you send alternating current (AC) to those windings, they produce magnetic poles. Since the AC cycles 50 or 60 times a second, those poles shift, creating a field that seems to spin around the inside of the stator, right where the rotor sits.

Wait, you might be thinking—why not just use a permanent magnet instead of that field? Well, for most motors, especially the high-torque ones powering industrial equipment or large electric vehicles, permanent magnets get too heavy and expensive at scale. The stator’s ability to generate that rotating magnetic field gives motor designers flexibility to adjust the motor’s torque, speed, and efficiency just by changing how the windings are arranged or the frequency of the current. That’s why when you buy an electric motor for a forklift, it can crank out the torque to lift 10,000 pounds, and a motor for a desk fan can spin quietly at high speeds—all because of how the stator’s windings are designed.

The second big function of a stator is to provide a structural and protective core for those windings, which are fragile. Think about it: a motor vibrates constantly, right? Whether it’s in a car bouncing down a highway or a factory pump running 24/7, the windings need to stay secure, and the insulation around them has to stay intact. The stacked steel laminates of the stator are held tight—we use either laser welding or riveting, depending on the application—to create a rigid, stable core. That core also acts as a heat sink. When current runs through the copper windings, they generate heat, and the steel stator absorbs that heat and transfers it out of the motor, keeping the whole system from overheating and failing. I see this firsthand when we work with customers building motors for outdoor power equipment, where heat from the engine compartment can be 150 degrees Fahrenheit; the stator’s core is the difference between a motor that runs for 1,000 hours and one that dies in 100.

But here’s something most casual explanations skip: the stator also plays a key role in torque regulation, the thing that makes motors useful for different jobs. Let’s take an example: a customer of ours builds small electric motors for robotic arms used in medical devices. Those arms need to move with precise, gentle force—too much torque, and they could damage a delicate surgical tool or sample. The stator we supply for that motor has a different lamination slot pattern than the stator we supply for a construction equipment motor, which needs to generate massive, steady torque to dig and lift. The number of slots, the size of the copper windings, and the way they’re connected all change the strength of the magnetic field the stator produces, which directly adjusts how much torque the motor outputs. That’s not a happy accident—that’s the stator doing its job, tailored to the application.

I want to make something clear: not all stators are the same. When I started out, I’d get a call from a guy building a small motor for a drone, asking for the same stator we’d supply to a company making forklift motors, and I’d have to explain why that wouldn’t work. A drone motor needs a lightweight stator, with thin laminates to keep the part’s weight down, and windings optimized for high speed, not high torque. A forklift motor needs heavy laminates, thicker windings, and a core designed to handle high current for long periods. That’s why our team here—we don’t just sell standard stators. We work with each customer, whether they’re a small startup building a new e-bike motor or a large OEM supplying electric buses, to design stators that fit their exact needs. It’s a hands-on business, no two jobs are identical, and that’s part of what makes it rewarding.

Over the past three years, we’ve seen the demand for stators explode, as more industries switch to electric power. Two years ago, we were shipping mostly stators for small appliances and industrial pumps. Last year, 40% of our business was stators for electric vehicle traction motors, e-bikes, and construction equipment. That shift has made us double down on testing, because when a stator fails in a car on the highway, the stakes are a lot higher than a failing washing machine motor. We run every stator we produce through multiple quality checks: testing for winding defects that could cause a short, checking air gap consistency (that gap between stator and rotor is so small, even a 0.002-inch difference can reduce motor efficiency by 5% or more), and simulating extreme temperature and vibration to make sure the stator holds up.

I’ve had customers ask me if, with all the new technology around permanent magnet motors and advanced rotors, the stator’s role is changing. Honestly? It’s more important than ever. As motor efficiency standards get stricter around the world—countries like the EU and U.S. now require motors to be 10% more efficient than they were five years ago—the stator is the key part that manufacturers are tuning to hit those numbers. The rotor is getting better, lighter, with better magnets, but if the stator is poorly designed, the whole motor will waste energy. I see it every time we take on a new customer: they come to us with a rotor design, and the first question is, “What stator can we pair with this to get the efficiency and torque we need?”

Now, let’s talk about something I don’t see enough of in these posts: common myths about stators. The biggest one is that the stator is just a passive part, only there to hold the windings. That’s wrong. The rotating magnetic field is the stator’s job—without it, the rotor can’t generate the force to turn. Another myth is that all stators use the same steel laminates. We’ve experimented with different grades of silicon steel, and we’ve seen a 3% difference in core loss between the lowest grade and the highest grade we use. For a large electric motor that runs 8,000 hours a year, that 3% difference translates to thousands of dollars in energy savings over the motor’s lifespan. That’s not a trivial detail.

If you’re reading this, and you’re a motor manufacturer, a design engineer, or even someone just curious about how the electric motors powering your daily life work, I hope this clears up what the stator actually does. It’s not just a stationary block of metal and copper. It’s the part that generates the force, regulates the torque and speed, protects the windings from damage and heat, and makes every electric motor, no matter the size or use, work as intended.

We’ve built our business on being that trusted partner for stator and rotor supply. Whether you’re prototyping a new motor or scaling production, our team has the experience to help you design and source stators that meet your exact specifications, with the quality and on-time delivery you need to keep your project moving. If you’re ready to talk through your stator needs, don’t hesitate to reach out.

Refractory Gunning Machine References

  1. Bolt, D. (2021). Electric Motor Design Fundamentals. CRC Press.
  2. Lipo, T. A. (2017). Introduction to AC Machine Design. Wiley IEEE Press.
  3. U.S. Department of Energy. (2022). Motor Efficiency Improvement Handbook. Office of Energy Efficiency and Renewable Energy.

Zhejiang Wengong Intelligent Technology Co., Ltd.
Zhejiang Wengong Intelligent Technology Co., Ltd. is one of the most professional stator and rotor manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy durable stator and rotor made in China here and get quotation from our factory. Quality products and reasonable price are available.
Address: No.111 Huakang Road, Liuao Village, Qiaoxia Town, Yongjia County, Wenzhou City, Zhejiang Province, China
E-mail: sales007@cngcjx.com
WebSite: https://www.wallgoe.com/